[PATCH v2 4/4] ARM: dts: da850-evm: add the output port to the vpif node
From: Bartosz Golaszewski <hidden>
Date: 2017-02-22 14:02:45
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Extend the vpif node with an output port with a single channel. NOTE: this is still mostly just hardware description - the actual driver is registered using pdata-quirks. We need the node however for correct pin control function selection. Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> --- arch/arm/boot/dts/da850-evm.dts | 19 +++++++++++++++---- arch/arm/boot/dts/da850.dtsi | 8 +++++++- 2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 3968a18..0298734 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts@@ -300,20 +300,31 @@ &vpif { pinctrl-names = "default"; - pinctrl-0 = <&vpif_capture_pins>; + pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; status = "okay"; + enable-gpios = <&tca6416 7 GPIO_ACTIVE_HIGH + &tca6416 6 GPIO_ACTIVE_HIGH + &tca6416 5 GPIO_ACTIVE_LOW>; + /* VPIF capture port */ - port { - vpif_ch0: endpoint@0 { + port@0 { + vpif_input_ch0: endpoint@0 { reg = <0>; bus-width = <8>; }; - vpif_ch1: endpoint@1 { + vpif_input_ch1: endpoint@1 { reg = <1>; bus-width = <8>; data-shift = <8>; }; }; + + /* VPIF display port */ + port@1 { + vpif_output_ch0: endpoint { + bus-width = <8>; + }; + }; };
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 5150331..c708155 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi@@ -358,7 +358,13 @@ status = "disabled"; /* VPIF capture port */ - port { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + + /* VPIF display port */ + port@1 { #address-cells = <1>; #size-cells = <0>; };
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html