Hi Vladimir,

Thank you for your feedback

On 2/21/2017 3:58 PM, Vladimir Zapolskiy wrote:

Hi Ramiro,

On 02/17/2017 03:14 PM, Ramiro Oliveira wrote:

quoted

Create device tree bindings documentation.

Signed-off-by: Ramiro Oliveira <roliveir-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
Acked-by: Rob Herring <redacted>
---
 .../devicetree/bindings/media/i2c/ov5647.txt       | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
new file mode 100644
index 000000000000..31956426d3b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt

@@ -0,0 +1,35 @@
+Omnivision OV5647 raw image sensor
+---------------------------------
+
+OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible		: "ovti,ov5647".
+- reg			: I2C slave address of the sensor.
+- clocks		: Reference to the xclk clock.

Is "xclk" clock a pixel clock or something else?

It's an external oscillator.

quoted

+- clock-names		: Should be "xclk".

You can remove this property, because there is only one source clock.

Ok.

quoted

+- clock-frequency	: Frequency of the xclk clock.

And after the last updates in the driver this property can be removed as well.

But I'm still using clk_get_rate in the driver, if I remove the frequency here
the probing will fail.

quoted

+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The OV5647 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Example:
+
+	i2c@2000 {
+		...
+		ov: camera@36 {
+			compatible = "ovti,ov5647";
+			reg = <0x36>;
+			clocks = <&camera_clk>;
+			clock-names = "xclk";
+			clock-frequency = <25000000>;

When you remove two unused properties, please don't forget to update the
example.

Ok.

quoted

+			port {
+				camera_1: endpoint {
+					remote-endpoint = <&csi1_ep1>;
+				};
+			};
+		};
+	};

--
With best wishes,
Vladimir

-- 
Best Regards

Ramiro Oliveira
Ramiro.Oliveira-HKixBCOQz3hWk0Htik3J/w@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html