On Wed, Jan 18, 2017 at 05:41:00PM +0800, Jun Gao wrote:
quoted hunk ↗ jump to hunk
From: Jun Gao <redacted>
This add i2c DT binding to i2c-mt6577.txt for MT2701.
Signed-off-by: Jun Gao <redacted>
---
.../devicetree/bindings/i2c/i2c-mt6577.txt | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
index 0ce6fa3..ef22ecf 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -4,11 +4,12 @@ The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: value should be either of the following.
- (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
- (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
- (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
- (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
- (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+ "mediatek,mt2701-i2c", for i2c compatible with mt2701 i2c.
+ "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+ "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+ "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+ "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+ "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
Are there no driver changes needed? It currently lists only 3 of the
above. If so, that would be nice to be mentioned in the commit message.