[PATCH v4 2/3] ASoC: zx-i2s: Add the info of pclk to the binding document for zx2967 family
From: Baoyou Xie <hidden>
Date: 2017-02-09 03:13:43
Also in:
alsa-devel, linux-arm-kernel, linux-clk, lkml
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
ZTE's zx2967 I2S controller driver introduces pclk, this patch documents this fact. Signed-off-by: Baoyou Xie <redacted> --- Documentation/devicetree/bindings/sound/zte,zx-i2s.txt | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 7e5aa6f..292ad50 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt@@ -1,10 +1,12 @@ ZTE ZX296702 I2S controller Required properties: - - compatible : Must be "zte,zx296702-i2s" + - compatible : Must be one of: + "zte,zx296718-i2s", "zte,zx296702-i2s" + "zte,zx296702-i2s" - reg : Must contain I2S core's registers location and length - clocks : Pairs of phandle and specifier referencing the controller's clocks. - - clock-names: "tx" for the clock to the I2S interface. + - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface. - dmas: Pairs of phandle and specifier for the DMA channel that is used by the core. The core expects two dma channels for transmit. - dma-names : Must be "tx" and "rx"
@@ -16,12 +18,12 @@ please check: * dma/dma.txt Example: - i2s0: i2s0@0b005000 { + i2s0: i2s@b005000 { #sound-dai-cells = <0>; - compatible = "zte,zx296702-i2s"; + compatible = "zte,zx296718-i2s", "zte,zx296702-i2s"; reg = <0x0b005000 0x1000>; - clocks = <&lsp0clk ZX296702_I2S0_DIV>; - clock-names = "tx"; + clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>; + clock-names = "wclk", "pclk"; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 5>, <&dma 6>; dma-names = "tx", "rx";
--
2.7.4