Re: [PATCH 1/2] dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel
From: Thierry Reding <hidden>
Date: 2017-02-06 13:05:55
Also in:
dri-devel, lkml
On Fri, Feb 03, 2017 at 10:59:05AM +0100, Maxime Ripard wrote:
quoted hunk ↗ jump to hunk
The Sitronix ST7789V is an LCD panel controller, controlled over SPI, that can drive 18-bits 240x320 LCD displays. Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> --- Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txtdiff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt new file mode 100644 index 000000000000..f70e6e9c54ed --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt@@ -0,0 +1,36 @@ +Sitronix ST7789V RGB panel with SPI control bus + +Required properties: + - compatible: "sitronix,st7789v" + - reg: Chip select of the panel on the SPI bus + - reset-gpios: a GPIO phandle for the reset pin
Shouldn't this have some sort of power supply? Thierry
Attachments
- signature.asc [application/pgp-signature] 833 bytes