On Fri, 03 Feb 2017, Greg KH wrote:

On Wed, Feb 01, 2017 at 02:31:35PM +0000, Lee Jones wrote:

quoted

When hardware flow-control is disabled, manual toggling of the UART's
reset line (RTS) using userland applications (e.g. stty) is not
possible, since the ASC IP does not provide this functionality in the
same was as some other IPs do.  Thus, we have to do this manually.

This set ensures the correct Pinctrl groups are configured and
obtained for both manual toggling of the RTS line and for the IP to
take over the lines when HW flow-control is requested by the user.

I see 2 series that are listed as "v2", which one to take?

The one which was sent most recently. ;)

I know, I'll drop both and wait for an updated set with all of the acks
added to them...

Easy way out. ;)

Please fix up and resend.

Okay, give me 5.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html