[PATCHv2 13/16] ov2640: update bindings
From: Hans Verkuil <hidden>
Date: 2017-01-30 14:06:25
Also in:
linux-media
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-02-01 · Re: [PATCHv2 13/16] ov2640: update bindings · Rob Herring <hidden>
From: Hans Verkuil <redacted> Update the bindings for this device based on a working DT example. Signed-off-by: Hans Verkuil <redacted> --- .../devicetree/bindings/media/i2c/ov2640.txt | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
index c429b5b..5e6c445 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt@@ -1,8 +1,8 @@ * Omnivision OV2640 CMOS sensor -The Omnivision OV2640 sensor support multiple resolutions output, such as -CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB -output format. +The Omnivision OV2640 sensor supports multiple resolutions output, such as +CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB +output formats. Required Properties: - compatible: should be "ovti,ov2640"
@@ -20,20 +20,18 @@ Documentation/devicetree/bindings/media/video-interfaces.txt. Example: i2c1: i2c@f0018000 { + status = "okay"; + ov2640: camera@0x30 { compatible = "ovti,ov2640"; reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_resetb>; - - resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; - - clocks = <&pck1>; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; clock-names = "xvclk"; - - assigned-clocks = <&pck1>; + assigned-clocks = <&pck0>; assigned-clock-rates = <25000000>; port {
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html