[PATCH v30 11/11] Documentation: dt: chosen properties for arm64 kdump

@@ -52,3 +52,40 @@ This property is set (currently only on PowerPC, and only needed on
 book3e) by some versions of kexec-tools to tell the new kernel that it
 is being booted by kexec, as the booting environment may differ (e.g.
 a different secondary CPU release mechanism)
+
+linux,usable-memory-range
+-------------------------
+
+This property (arm64 only) holds a base address and size, describing a
+limited region in which memory may be considered available for use by
+the kernel. Memory outside of this range is not available for use.
+
+This property describes a limitation: memory within this range is only
+valid when also described through another mechanism that the kernel
+would otherwise use to determine available memory (e.g. memory nodes
+or the EFI memory map). Valid memory may be sparse within the range.
+e.g.
+
+/ {
+	chosen {
+		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
+	};
+};
+
+The main usage is for crash dump kernel to identify its own usable
+memory and exclude, at its boot time, any other memory areas that are
+part of the panicked kernel's memory.
+
+linux,elfcorehdr
+----------------
+
+This property (currently used only on arm64) holds the memory range,
+the address and the size, of the elf core header which mainly describes
+the panicked kernel's memory layout as PT_LOAD segments of elf format.
+e.g.
+
+/ {
+	chosen {
+		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
+	};
+};