[PATCH v3 6/7] NFC: trf7970a: Enable pins are active high not active low
DORMANTno replies
REVIEWED: 1 (0M)
From: Mark Greer <hidden>
Date: 2017-01-20 19:17:44
Subsystem:
networking drivers, nfc subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, David Heidelberg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
1 review trailer.
The example DTS code for the trf7970a sets the GPIOs for the EN and EN2 pins to active low when they are really active high so correct the error. Acked-by: Rob Herring <redacted> Signed-off-by: Mark Greer <mgreer-luAo+O/VEmrlveNOaEYElw@public.gmane.org> --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 07008d334536..28e9247d8a97 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt@@ -34,8 +34,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; autosuspend-delay = <30000>; irq-status-read-quirk;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html