Thread (45 messages) 45 messages, 7 authors, 2017-02-07
STALE3427d
Revisions (3)
  1. v1 [diff vs current]
  2. v3 current
  3. v4 [diff vs current]

[PATCH v3 6/7] dt-bindings: Add Multi-Inno MI0283QT binding

From: Noralf Trønnes <hidden>
Date: 2017-01-31 16:04:00
Also in: dri-devel, lkml
Subsystem: drm driver for mi0283qt, drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers: Alex Lanzano, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Add device-tree binding documentation for the MI0283QT display panel.

Signed-off-by: Noralf Trønnes <redacted>
---

Datasheet: https://cdn-shop.adafruit.com/datasheets/MI0283QT-11+V1.1.PDF

 .../bindings/display/multi-inno,mi0283qt.txt       | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 0000000..eed48c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible:	"multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios:	D/C pin. The presence/absence of this GPIO determines
+		the panel interface mode (IM[3:0] pins):
+		- present: IM=x110 4-wire 8-bit data serial interface
+		- absent:  IM=x101 3-wire 9-bit data serial interface
+- reset-gpios:	Reset pin
+- power-supply:	A regulator node for the supply voltage.
+- backlight:	phandle of the backlight device attached to the panel
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	mi0283qt@0{
+		compatible = "multi-inno,mi0283qt";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		rotation = <90>;
+		dc-gpios = <&gpio 25 0>;
+		backlight = <&backlight>;
+	};
--
2.10.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help