On 01/30/2017 01:08 AM, Aditya Xavier wrote:

Would you require me to send the revised Patch ?

Or would this do ?

Will take care of it this time.

And thanks for guiding me through this process :)

quoted

On 29-Jan-2017, at 2:45 AM, Rafał Miłecki [off-list ref] wrote:

On 28 January 2017 at 15:37, AdityaXavier [off-list ref] wrote:

quoted

From: Aditya Xavier <redacted>

Added two WAN status LEDs and a GPIO Key for Brightness which were missing.
V2: Updated subject, Power LED names, and WAN labels.

Changelog (V2 ... part) should go into that /comments/ section (see below).
Florian: can you drop that line when applying this patch? Otherwise it
looks OK to me.

quoted

Signed-off-by: Aditya Xavier <redacted>

Acked-by: Rafał Miłecki <rafal@milecki.pl>

Thanks for the patch!

quoted

---

Right here, below these 3 dashes is a place where you can add extra
comments (they won't go into log when doing "git am").

quoted

arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a72..90d4420 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts

@@ -27,18 +27,30 @@
       leds {
               compatible = "gpio-leds";

-               power0 {
+               power-white {
                       label = "bcm53xx:white:power";
                       gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
                       linux,default-trigger = "default-on";
               };

-               power1 {
+               power-amber {
                       label = "bcm53xx:amber:power";
                       gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
                       linux,default-trigger = "default-off";
               };

+               wan-white {
+                       label = "bcm53xx:white:wan";
+                       gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "default-on";
+               };
+
+               wan-amber {
+                       label = "bcm53xx:amber:wan";
+                       gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "default-off";
+               };
+
               5ghz-1 {
                       label = "bcm53xx:white:5ghz-1";
                       gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;

@@ -104,6 +116,12 @@
                       linux,code = <KEY_RESTART>;
                       gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
               };
+
+               brightness {
+                       label = "Backlight";
+                       linux,code = <KEY_BRIGHTNESS_ZERO>;
+                       gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+               };
       };

};

--
2.9.3

-- 
Rafał

-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel