Re: [PATCH] ARM: dts: imx53-qsb-common: fix FEC pinmux config

On Wed, Jan 25, 2017 at 06:25:48AM +0100, linux-kernel-dev@beckhoff.com wrote:

From: Patrick Bruenn <redacted>

The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.

Signed-off-by: Patrick Bruenn <redacted>

Applied, thanks.