Thread (51 messages) 51 messages, 6 authors, 2017-02-08
STALE3400d
Revisions (5)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v4 [diff vs current]

[PATCH v2 02/25] mfd: axp20x: correct name of temperature data ADC registers

From: Quentin Schulz <hidden>
Date: 2017-01-27 09:02:25
Also in: linux-arm-kernel, linux-iio, linux-pm, lkml
Subsystem: multifunction devices (mfd), the rest · Maintainers: Lee Jones, Linus Torvalds

The registers 0x56 and 0x57 of AXP22X PMIC store the value of the
internal temperature of the PMIC.

This patch modifies the name of these registers from AXP22X_PMIC_ADC_H/L
to AXP22X_PMIC_TEMP_H/L so their purpose is clearer.

Signed-off-by: Quentin Schulz <redacted>
---

added in v2

 drivers/mfd/axp20x.c       | 2 +-
 include/linux/mfd/axp20x.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 619a83e..9c2fd37 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -102,7 +102,7 @@ static const struct regmap_range axp22x_volatile_ranges[] = {
 	regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT),
 	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
 	regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
-	regmap_reg_range(AXP22X_PMIC_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
+	regmap_reg_range(AXP22X_PMIC_TEMP_H, AXP20X_IPSOUT_V_HIGH_L),
 	regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES),
 };
 
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index a4860bc..5ecadbb 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -228,8 +228,8 @@ enum {
 #define AXP20X_OCV_MAX			0xf
 
 /* AXP22X specific registers */
-#define AXP22X_PMIC_ADC_H		0x56
-#define AXP22X_PMIC_ADC_L		0x57
+#define AXP22X_PMIC_TEMP_H		0x56
+#define AXP22X_PMIC_TEMP_L		0x57
 #define AXP22X_TS_ADC_H			0x58
 #define AXP22X_TS_ADC_L			0x59
 #define AXP22X_BATLOW_THRES1		0xe6
-- 
2.9.3
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help