[PATCH v2 1/4] dt-bindings: clock: renesas: cpg-mssr: Document reset control support
flat view
STALE3544d
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2017-01-25 09:45:24
Also in:
linux-arm-kernel, linux-clk, linux-renesas-soc, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, renesas clock drivers, the rest · Maintainers:
Stephen Boyd, Brian Masney, Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
Document properties needed to use the Reset Control feature of the Renesas Clock Pulse Generator / Module Standby and Software Reset module. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - Change oneline summary to refer to dt-bindings. --- Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index c469194129536332..f4f944d813081857 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt@@ -42,6 +42,10 @@ Required Properties: Domain bindings in Documentation/devicetree/bindings/power/power_domain.txt. + - #reset-cells: Must be 1 + - The single reset specifier cell must be the module number, as defined + in the datasheet. + Examples --------
@@ -55,6 +59,7 @@ Examples clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; };
@@ -69,5 +74,6 @@ Examples dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; + resets = <&cpg 310>; status = "disabled"; };
--
1.9.1