Thread (32 messages) 32 messages, 4 authors, 2017-01-27
STALE3436d
Revisions (2)
  1. v1 current
  2. v2 [diff vs current]

[PATCH 08/11] ARM: dts: sun8i-a23-q8-tablet: Drop pinmux setting for codec PA gpio

From: Chen-Yu Tsai <hidden>
Date: 2017-01-24 02:33:49
Also in: linux-arm-kernel, linux-clk, lkml
Subsystem: arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers: Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds

We are moving towards handling GPIO pinmux settings that don't require
extra bias or drive strength settings to use the GPIO bindings only.

Signed-off-by: Chen-Yu Tsai <redacted>
---
 arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 10 ----------
 drivers/clk/sunxi-ng/ccu-sun9i-a80.c      | 24 ++++++++++++------------
 2 files changed, 12 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
index 3ab5c0c09d93..b6958e8f2f01 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -50,7 +50,6 @@
 };
 
 &codec {
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 	allwinner,audio-routing =
 		"Headphone", "HP",
@@ -62,12 +61,3 @@
 		"Headset Mic", "HBIAS";
 	status = "okay";
 };
-
-&pio {
-	codec_pa_pin: codec_pa_pin@0 {
-		allwinner,pins = "PH9";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
index 5626e4674f48..e13e313ce4f5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
@@ -42,7 +42,7 @@ static struct clk_div_table pll_cpux_p_div_table[] = {
 static struct ccu_nm pll_c0cpux_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(0),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
 	.common		= {
 		.reg		= 0x000,
@@ -56,7 +56,7 @@ static struct ccu_nm pll_c0cpux_clk = {
 static struct ccu_nm pll_c1cpux_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(1),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
 	.common		= {
 		.reg		= 0x004,
@@ -78,7 +78,7 @@ static struct ccu_nm pll_c1cpux_clk = {
 static struct ccu_nm pll_audio_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(2),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV_OFFSET(0, 6, 0),
 	.common		= {
 		.reg		= 0x008,
@@ -93,7 +93,7 @@ static struct ccu_nm pll_audio_clk = {
 static struct ccu_nkmp pll_periph0_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(3),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
@@ -109,7 +109,7 @@ static struct ccu_nkmp pll_periph0_clk = {
 static struct ccu_nkmp pll_ve_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(4),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
@@ -125,7 +125,7 @@ static struct ccu_nkmp pll_ve_clk = {
 static struct ccu_nkmp pll_ddr_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(5),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
@@ -141,7 +141,7 @@ static struct ccu_nkmp pll_ddr_clk = {
 static struct ccu_nm pll_video0_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(6),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.common		= {
 		.reg		= 0x018,
@@ -156,7 +156,7 @@ static struct ccu_nm pll_video0_clk = {
 static struct ccu_nkmp pll_video1_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(7),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(0, 2), /* external divider p */
 	.common		= {
@@ -172,7 +172,7 @@ static struct ccu_nkmp pll_video1_clk = {
 static struct ccu_nkmp pll_gpu_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(8),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
@@ -188,7 +188,7 @@ static struct ccu_nkmp pll_gpu_clk = {
 static struct ccu_nkmp pll_de_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(9),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
@@ -204,7 +204,7 @@ static struct ccu_nkmp pll_de_clk = {
 static struct ccu_nkmp pll_isp_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(10),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
@@ -220,7 +220,7 @@ static struct ccu_nkmp pll_isp_clk = {
 static struct ccu_nkmp pll_periph1_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(11),
-	.n		= _SUNXI_CCU_MULT_OFFSET_MIN(8, 8, 0, 12),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
 	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
 	.common		= {
-- 
2.11.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help