On Fri, Jan 20, 2017 at 07:02:08PM +0530, Sekhar Nori wrote:

Hi Rob,

On Friday 20 January 2017 04:51 PM, Bartosz Golaszewski wrote:

quoted

Add DT bindings for the TI DA850 AHCI SATA controller.

Signed-off-by: Bartosz Golaszewski <redacted>

Could you ack this binding?

First I'm seeing it that I recall and v5? That either means the DT list 
wasn't copied or new versions are being sent out faster than can be 
reviewed. Sending new versions puts you at the back of the queue.

Thanks,
Sekhar

quoted

---
 Documentation/devicetree/bindings/ata/ahci-da850.txt | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt

diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 0000000..268fe87
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt

@@ -0,0 +1,15 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+  - compatible: must be "ti,da850-ahci"
+  - reg: physical base addresses and sizes of the controller's register areas

Need to state how many and what the regions are.

quoted

+  - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Example:
+
+	sata: sata@218000 {
+		compatible = "ti,da850-ahci";
+		reg = <0x218000 0x2000>, <0x22c018 0x4>;
+		interrupts = <67>;
+	};