Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
From: Kevin Hilman <khilman@baylibre.com>
Date: 2017-01-18 00:39:30
Also in:
linux-arm-kernel, linux-ide, lkml
Possibly related (same subject, not in this thread)
- 2017-01-17 · Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node · David Lechner <david@lechnology.com>
- 2017-01-17 · [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node · Bartosz Golaszewski <hidden>
Bartosz Golaszewski [off-list ref] writes:
Enable the SATA node for da850-lcdk. We omit the pinctrl property on purpose - the muxed SATA pins are not hooked up to anything SATA-related on the lcdk. The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of 15 for 1.5GHz PLL rate.
leftover comment from previous version? Kevin
quoted hunk
Signed-off-by: Bartosz Golaszewski <redacted> --- arch/arm/boot/dts/da850-lcdk.dts | 4 ++++ 1 file changed, 4 insertions(+)diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..fbeee3c 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts@@ -105,6 +105,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>;