On Wed, 2017-01-04 at 11:06 +0800, HS Liao wrote:

Hi,

This is Mediatek MT8173 Command Queue(CMDQ) driver. The CMDQ is used
to help write registers with critical time limitation, such as
updating display configuration during the vblank. It controls Global
Command Engine (GCE) hardware to achieve this requirement.

These patches have a build dependency on top of v4.10-rc2.

Changes since v19:
 - rebase to v4.10-rc2

Best regards,
HS Liao

HS Liao (4):
  dt-bindings: soc: Add documentation for the MediaTek GCE unit
  mailbox: mediatek: Add Mediatek CMDQ driver
  arm64: dts: mt8173: Add GCE node
  soc: mediatek: Add Mediatek CMDQ helper

 .../devicetree/bindings/mailbox/mtk-gce.txt        |  43 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  10 +
 drivers/mailbox/Kconfig                            |  10 +
 drivers/mailbox/Makefile                           |   2 +
 drivers/mailbox/mtk-cmdq-mailbox.c                 | 596 +++++++++++++++++++++
 drivers/soc/mediatek/Kconfig                       |  12 +
 drivers/soc/mediatek/Makefile                      |   1 +
 drivers/soc/mediatek/mtk-cmdq-helper.c             | 310 +++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h           |  75 +++
 include/linux/soc/mediatek/mtk-cmdq.h              | 174 ++++++
 10 files changed, 1233 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt
 create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
 create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
 create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
 create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h

Hi Jassi, Matthias,

Sorry to disturb you.
Do you have any further comments on CMDQ v20?

Thanks.
HS