Re: [PATCH v2 5/6] arm64: allwinner: a64: Add MMC pinctrl nodes
From: André Przywara <andre.przywara@arm.com>
Date: 2017-01-10 00:55:13
Also in:
linux-arm-kernel, linux-mmc, lkml
On 09/01/17 16:46, Maxime Ripard wrote:
The A64 only has a single set of pins for each MMC controller. Since we already have boards that require all of them, let's add them to the DTSI.
This matches my reworked version from the previous series, so: Reviewed-by: Andre Przywara <andre.przywara@arm.com> Cheers, Andre.
quoted hunk ↗ jump to hunk
Signed-off-by: Maxime Ripard <redacted> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 ++++++++++++++++++++- 1 file changed, 25 insertions(+), 0 deletions(-)diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 143e9706438f..8e149498e096 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi@@ -205,6 +205,31 @@ function = "i2c1"; }; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC1", "PC5", "PC6", "PC8", "PC9", + "PC10","PC11", "PC12", "PC13", + "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + uart0_pins_a: uart0@0 { pins = "PB8", "PB9"; function = "uart0";