[PATCH v11 6/8] ARM: dts: imx6qdl: Enable usb node children with <reg>
STALE3540d
From: Peter Chen <hidden>
Date: 2017-01-05 06:04:18
Also in:
linux-arm-kernel, linux-pm, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v11 of 16 in this series.
Revisions (16)
- v1 [diff vs current]
- v3 [diff vs current]
- v4 [diff vs current]
- v5 [diff vs current]
- v6 [diff vs current]
- v7 [diff vs current]
- v8 [diff vs current]
- v9 [diff vs current]
- v10 [diff vs current]
- v1 [diff vs current]
- v11 current
- v12 [diff vs current]
- v13 [diff vs current]
- v14 [diff vs current]
- v15 [diff vs current]
- v16 [diff vs current]
From: Joshua Clayton <redacted> Give usb nodes #address and #size attributes, so that a child node representing a permanently connected device such as an onboard hub may be addressed with a <reg> attribute Signed-off-by: Joshua Clayton <redacted> Signed-off-by: Peter Chen <redacted> --- arch/arm/boot/dts/imx6qdl.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 53e6e63..e6725f1 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi@@ -936,6 +936,8 @@ usbh1: usb@02184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>;
@@ -950,6 +952,8 @@ usbh2: usb@02184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>;
@@ -963,6 +967,8 @@ usbh3: usb@02184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>;
--
2.7.4