[RESEND PATCHv3 1/2] regulator: fixed: dt: Allow an optional over current pin
From: Axel Haslam <hidden>
Date: 2016-12-15 11:28:55
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Add support for an optional over current input pin which can be used to send an over current event to the regulator consumer. Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Acked-by: Rob Herring <redacted> Signed-off-by: Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> --- Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 4fae41d..b145abb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt@@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low. - gpio-open-drain: GPIO is open drain type. If this property is missing then default assumption is false. -vin-supply: Input supply name. +- over-current-gpios: Input gpio that signal an over current condition. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used.
@@ -26,6 +27,7 @@ Example: regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 16 0>; + over-current-gpios = <&gpio1 18 0>; startup-delay-us = <70000>; enable-active-high; regulator-boot-on;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html