[PATCHv2 04/10] mmc: dw_mmc: use the hold register when send stop command
From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2016-11-15 10:12:26
Also in:
linux-mmc
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, synopsys designware mmc/sd/sdio driver, the rest · Maintainers:
Ulf Hansson, Jaehoon Chung, Shawn Lin, Linus Torvalds
If DW_MMC_CARD_NO_USE_HOLD isn't set, it's usesd by default. Enve if SDMMC_CMD_USB_HOLD_REG is set in prepare_command(), but it doesn't set in pre_stop_abort(). To maintain the consistency, add the checking condition for this. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> --- drivers/mmc/host/dw_mmc.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index be36f48..3cda68c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c@@ -337,6 +337,9 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd) cmdr = stop->opcode | SDMMC_CMD_STOP | SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP; + if (!test_bit(DW_MMC_CARD_NO_USE_HOLD, &host->cur_slot->flags)) + cmdr |= SDMMC_CMD_USE_HOLD_REG; + return cmdr; }
--
2.10.1