Hi,

On Wed, Nov 23, 2016 at 03:11:51PM +0100, Quentin Schulz wrote:

The GPIOs present in the AXP209 PMIC have multiple functions. They
typically allow a pin to be used as GPIO input or output and can also be
used as ADC or regulator for example.[1]

This adds the possibility to use all functions of the GPIOs present in
the AXP209 PMIC thanks to pinctrl subsystem.

[1] see registers 90H, 92H and 93H at
    http://dl.linux-sunxi.org/AXP/AXP209_Datasheet_v1.0en.pdf

Signed-off-by: Quentin Schulz <redacted>

I've said it already face to face, but ideally you should split that
patch into logical changes.

I can see here at least three:
  - Adding the pinctrl features
  - Renaming the structure and functions
  - Removal of a few functions

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com