Re: [PATCH 1/3] pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
From: Linus Walleij <hidden>
Date: 2016-11-25 13:40:43
Also in:
linux-gpio, lkml
On Thu, Nov 24, 2016 at 9:45 PM, Peter Rosin [off-list ref] wrote:
All other registers on these chips are 8-bit, but reg_sense is 16-bits
and therefore needs to be moved down one notch.
This was apparently overlooked in the conversion to regmap, which only
updated the register locations for the 16-bit chips.
Fixes: 6489677f86c3 ("pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap API")
Signed-off-by: Peter Rosin <redacted>Patch applied. Yours, Linus Walleij