[RFC PATCH net v2 2/3] dt: bindings: add ethernet phy eee-disable-advert option documentation
From: Jerome Brunet <jbrunet@baylibre.com>
Date: 2016-11-21 15:35:58
Also in:
linux-amlogic, linux-arm-kernel, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- Documentation/devicetree/bindings/net/phy.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index bc1c3c8bf8fa..7f066b7c1e2c 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt@@ -35,6 +35,11 @@ Optional Properties: - broken-turn-around: If set, indicates the PHY device does not correctly release the turn around line low at the end of a MDIO transaction. +- eee-advert-disable: Bits to clear in the MDIO_AN_EEE_ADV register to + disable EEE modes. Example + * 0x4: disable EEE for 1000T, + * 0x6: disable EEE for 100TX and 1000T + Example: ethernet-phy@0 {
--
2.7.4