[PATCH v3 1/7] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio

@@ -0,0 +1,76 @@
+Common multiplexer controller bindings
+
+A mux controller will have one, or several, child devices that uses (or
+consumes) a mux controller. A mux controller can possibly control several
+parallel multiplexers. The node for a mux controller will have one child
+node for each multiplexer controller consumer.
+
+A mux controller provides a number of states to its consumers, and the
+state space is a simple zero-based enumeration. I.e. 0-1 for a 2-way
+multiplexer, 0-7 for an 8-way multiplexer, etc.
+
+Example:
+
+	/*
+	 * Two consumers (one for an ADC line and one for an i2c bus) of
+	 * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+	 */
+	mux {
+		compatible = "mux-gpio";
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+
+		adc {
+			compatible = "iio-mux";
+			io-channels = <&adc 0>;
+			io-channel-names = "parent";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sync-1@0 {
+				reg = <0>;
+			};
+
+			in@1 {
+				reg = <1>;
+			};
+
+			out@2 {
+				reg = <2>;
+			};
+
+			sync-2@3 {
+				reg = <3>;
+			};
+		};
+
+		i2c-mux {
+			compatible = "i2c-mux-simple,mux-locked";
+			i2c-parent = <&i2c1>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ssd1307: oled@3c {
+					/* ... */
+				};
+			};
+
+			i2c@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pca9555: pca9555@20 {
+					/* ... */
+				};
+			};
+		};
+	};

@@ -0,0 +1,78 @@
+GPIO-based multiplexer controller bindings
+
+Define what GPIO pins are used to control a multiplexer. Or several
+multiplexers, if the same pins control more than one multiplexer.
+
+Required properties:
+- compatible : "mux-gpio"
+- mux-gpios : list of gpios used to control the multiplexer, least
+	      significant bit first.
+* Standard mux-controller bindings as decribed in mux-controller.txt
+
+Optional properties:
+- idle-state : if present, the state the mux will have when idle.
+
+The multiplexer state is defined as the number represented by the
+multiplexer GPIO pins, where the first pin is the least significant
+bit. And active pin is a binary 1, an inactive pin is a binary 0.
+
+Example:
+	mux {
+		compatible = "mux-gpio";
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+
+		adc {
+			compatible = "iio-mux";
+			io-channels = <&adc 0>;
+			io-channel-names = "parent";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sync-1@0 {
+				reg = <0>;
+			};
+
+			in@1 {
+				reg = <1>;
+			};
+
+			out@2 {
+				reg = <2>;
+			};
+
+			sync-2@3 {
+				reg = <3>;
+			};
+		};
+
+		i2c-mux {
+			compatible = "i2c-mux-simple,mux-locked";
+			i2c-parent = <&i2c1>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ssd1307: oled@3c {
+					/* ... */
+				};
+			};
+
+			i2c@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pca9555: pca9555@20 {
+					/* ... */
+				};
+			};
+		};
+	};

@@ -8244,6 +8244,11 @@ S:	Orphan
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
+MULTIPLEXER SUBSYSTEM
+M:	Peter Rosin <peda@axentia.se>
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/mux-*
+
 MULTISOUND SOUND DRIVER
 M:	Andrew Veliath <andrewtv@usa.net>
 S:	Maintained