@@ -0,0 +1,59 @@
+IIO multiplexer bindings
+
+If a multiplexer is used to select when hardware signal is fed to
+e.g. an ADC channel, these bindings describe that situation.
+
+Required properties:
+- compatible : "iio-mux"
+- io-channels : Channel node of the parent channel that has multiplexed
+		input.
+- io-channel-names : Should be "parent".
+- control-muxes : Node of the multiplexer that controls the input signal.
+- control-mux-names : Should be "mux".
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for iio-mux child nodes:
+- reg : The multiplexer number.
+
+Optional properties for iio-mux child nodes:
+- iio-ext-info : Array of string pairs, the first item in each pair is the
+		 iio ext_info attribute name, and the second item in each
+		 pair is the iio ext_info value for that attribute. The
+		 mux will write these ext_info values to the corresponding
+		 ext_info attributes on every multiplexer switch.
+
+Example:
+	control_adc_mux: control-adc-mux {
+		compatible = "mux-gpio";
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		control-muxes = <&control_adc_mux>;
+		control-mux-names = "mux";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sync@0 {
+			reg = <0>;
+			iio-ext-info = "invert", "1";
+		};
+
+		in@1 {
+			reg = <1>;
+			iio-ext-info = "invert", "1";
+		};
+
+		system-regulator@2 {
+			reg = <2>;
+			iio-ext-info = "invert", "0";
+		};
+	};