Re: [PATCH V3 1/6] clk: tegra: add TEGRA20_CLK_NOR to init table
From: Jon Hunter <jonathanh@nvidia.com>
Date: 2016-11-03 13:45:26
Also in:
linux-arm-kernel, linux-clk, linux-tegra, lkml
On 03/11/16 12:30, Mirza Krak wrote:
2016-11-03 13:26 GMT+01:00 Mirza Krak [off-list ref]:quoted
2016-11-03 11:06 GMT+01:00 Jon Hunter [off-list ref]:quoted
Hi Mirza, On 27/10/16 15:01, Mirza Krak wrote:quoted
From: Mirza Krak <redacted> Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which is max rate. The maximum rate value of 92 MHz is pulled from the downstream L4T kernel.Thanks for adding this. I assume that this is from an L4T r16 release with a v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was unable to see where this is set. Obviously v3.1 did not have CCF and so everything seems to be in the arch/arm/mach-tegra directory for setting up clocks. Can you point me to the appropriate sources so I can ACK this?I use the kernel sources provided by Toradex, and these sources are based on L4T r16 release. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463Ops, pre-mature send. I also added Marcel from Toradex on CC. The link to the source are [1] for Tegra2 and [2] for Tegra3. [1]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463 [2]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra3_clocks.c?h=tegra#n4353
Great. Yes I see the same. Thanks! Jon -- nvpublic