In order to have a proper topology of regulators for a platform, each
registering regulator needs to populate supply_name field for identifying
its supply's name. Add supply_name field for lp873x regulators.

Cc: Lee Jones <redacted>
Cc: Keerthy <redacted>
Signed-off-by: Lokesh Vutla <redacted>
---
 Documentation/devicetree/bindings/mfd/lp873x.txt | 8 ++++++++
 drivers/regulator/lp873x-regulator.c             | 1 +
 2 files changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
index 52766c2..998837a 100644
--- a/Documentation/devicetree/bindings/mfd/lp873x.txt
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt

@@ -7,6 +7,9 @@ Required properties:
   - #gpio-cells:	Should be two.  The first cell is the pin number and
 			the second cell is used to specify flags.
 			See ../gpio/gpio.txt for more information.
+  - xxx-in-supply:	Phandle to parent supply node of each regulator
+			populated under regulators node. xxx should match
+			the supply_name populated in driver.

   - regulators:	List of child nodes that specify the regulator
 			initialization data.
 Example:

@@ -17,6 +20,11 @@ pmic: lp8733@60 {
 	gpio-controller;
 	#gpio-cells = <2>;
 
+	buck0-in-supply = <&vsys_3v3>;
+	buck1-in-supply = <&vsys_3v3>;
+	ldo0-in-supply = <&vsys_3v3>;
+	ldo1-in-supply = <&vsys_3v3>;
+
 	regulators {
 		lp8733_buck0: buck0 {
 			regulator-name = "lp8733-buck0";