[PATCH v2 2/5] doc: dt: add cyclone-spi binding document
From: Joshua Clayton <hidden>
Date: 2016-10-28 16:58:12
Also in:
linux-arm-kernel, lkml
Subsystem:
fpga manager framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Moritz Fischer, Xu Yilun, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Describe a cyclonei-ps-spi devicetree entry, required features Signed-off-by: Joshua Clayton <redacted> --- .../bindings/fpga/cyclone-ps-spi-fpga-mgr.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt
diff --git a/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt
new file mode 100644
index 0000000..c942281
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt@@ -0,0 +1,23 @@ +Altera Cyclone Passive Serial SPI FPGA Manager + +Altera Cyclone FPGAs support a method of loading the bitstream over what is +referred to as "passive serial". +The passive serial link is not technically spi, and might require extra +circuits in order to play nicely with other spi slaves on the same bus. + +See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +Required properties: +- compatible : should contain "altr,cyclone-ps-spi-fpga-mgr" +- reg : spi slave id of the fpga +- config-gpio : config pin (referred to as nCONFIG in the cyclone manual) +- status-gpio : status pin (referred to as nSTATUS in the cyclone manual) + +Example: + fpga_spi: evi-fpga-spi@0 { + compatible = "altr,cyclone-ps-spi-fpga-mgr"; + spi-max-frequency = <20000000>; + reg = <0>; + config-gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>; + status-gpio = <&gpio4 11 GPIO_ACTIVE_HIGH>; + };
--
2.7.4