Re: [PATCH v2 1/6] clk: stm32f4: Add LSI & LSE clocks
From: Stephen Boyd <hidden>
Date: 2016-10-19 20:24:38
Also in:
linux-arm-kernel, linux-clk, lkml
On 10/14, gabriel.fernandez-qxv4g6HH51o@public.gmane.org wrote:
quoted hunk ↗ jump to hunk
@@ -292,8 +298,110 @@ static int stm32f4_rcc_lookup_clk_idx(u8 primary, u8 secondary) return clks[i]; } +static struct regmap *pdrm;
This can't be part of the stm32_rgate structure?
+
+static inline void disable_power_domain_write_protection(void)
+{
+ regmap_update_bits(pdrm, 0x00, (1 << 8), (1 << 8));
+}
+
+static inline void enable_power_domain_write_protection(void)
+{
+ regmap_update_bits(pdrm, 0x00, (1 << 8), (0 << 8));
+}
+
+struct stm32_rgate {
+ struct clk_hw hw;
+ struct clk_gate gate;Why not use the clk_hw inside clk_gate?
+ u8 bit_rdy_idx;
+};
+
+#define RTC_TIMEOUT 1000000
+
+#define to_rgclk(_hw) container_of(_hw, struct stm32_rgate, hw)
+
+static int rgclk_enable(struct clk_hw *hw)
+{
+ struct stm32_rgate *rgate = to_rgclk(hw);
+ struct clk_hw *gate_hw = &rgate->gate.hw;
+ struct clk_gate *gate = to_clk_gate(gate_hw);
+ u32 reg;
+ int ret;
+
+ __clk_hw_set_clk(gate_hw, hw);Then we don't need this part.
+
+ disable_power_domain_write_protection();
+
+ clk_gate_ops.enable(gate_hw);
+
+ ret = readl_relaxed_poll_timeout_atomic(gate->reg, reg,
+ reg & rgate->bit_rdy_idx, 1000, RTC_TIMEOUT);
+
+ enable_power_domain_write_protection();
+
+ return ret;
+}
+
+static void rgclk_disable(struct clk_hw *hw)
+{
+ clk_gate_ops.disable(hw);
+}
+
+static int rgclk_is_enabled(struct clk_hw *hw)
+{
+ return clk_gate_ops.is_enabled(hw);
+}
+
+Drop the double newline here please.
+static const struct clk_ops rgclk_ops = {
+ .enable = rgclk_enable,
+ .disable = rgclk_disable,
+ .is_enabled = rgclk_is_enabled,
+};
+
+static struct clk_hw *clk_register_rgate(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx, u8 bit_rdy_idx,
+ u8 clk_gate_flags, spinlock_t *lock)
+{
+ struct stm32_rgate *rgate;
+ struct clk_init_data init = { NULL };
+ struct clk_hw *hw;
+ int ret;
+
+ rgate = kzalloc(sizeof(*rgate), GFP_KERNEL);
+ if (!rgate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &rgclk_ops;
+ init.flags = flags | CLK_IS_BASIC;Please no CLK_IS_BASIC flags.
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ rgate->hw.init = &init;
+ rgate->bit_rdy_idx = bit_rdy_idx;
+
+ rgate->gate.lock = lock;
+ rgate->gate.reg = reg;
+ rgate->gate.bit_idx = bit_idx;
+
+ hw = &rgate->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(rgate);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
static const char *sys_parents[] __initdata = { "hsi", NULL, "pll" };
+const char *rtc_parents[4] = {static const char * const?
quoted hunk ↗ jump to hunk
+ "no-clock", "lse", "lsi", "hse-rtc" +}; + static const struct clk_div_table ahb_div_table[] = { { 0x0, 1 }, { 0x1, 1 }, { 0x2, 1 }, { 0x3, 1 }, { 0x4, 1 }, { 0x5, 1 }, { 0x6, 1 }, { 0x7, 1 },@@ -319,6 +427,12 @@ static void __init stm32f4_rcc_init(struct device_node *np) return; } + pdrm = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
Is there a dt binding update for this? It should probably be optional?
+ if (IS_ERR(pdrm)) {
+ pr_err("%s: Unable to get syscfg\n", __func__);
+ goto fail;
+ }
+
hse_clk = of_clk_get_parent_name(np, 0);
-- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html