Re: [PATCH v2] ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288-veyron-speedy.

On 2016-10-18, Paul Kocialkowski wrote:

Le mardi 18 octobre 2016 à 11:21 +0200, Heiko Stübner a écrit :

quoted

Am Sonntag, 16. Oktober 2016, 21:49:43 schrieb Paul Kocialkowski:

quoted

Le mardi 27 septembre 2016 à 13:53 -0700, Vagrant Cascadian a écrit :

quoted

This essentially mimics what was done with rk3288-veyron-minnie in
commit 984926781122f034d5bc9962815d135b6c4a8e1d.

The eMMC of the speedy Chromebook also appears to need the same tuning
workaround, as it frequently fails to recognize the eMMC without it.

I have a device where (without this patch) eMMC sometimes fails, with:
[    3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to
175 [    3.571742] mmc2: new HS200 MMC card at address 0001
[    3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB 
[    3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB
[    3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB
[    3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB
[    3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd
response 0x900, card status 0x0

quoted

quoted

And sometimes works, with:
[    3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to
176 [    3.491093] mmc2: new HS200 MMC card at address 0001
[    3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB 
[    3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB
[    3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB
[    3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB
[    3.493548]  mmcblk2: p1 p2

This is similar behavior to my veyron-speedy. Here are several boot logs
From running 4.8.0-rc7, with some failures and some successes:

  https://cascadia.aikidev.net/~vagrant/veyron-speedy/

quoted

quoted

However, with this change, it always fails, with:
[    3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req
52000000Hz, actual 50000000HZ div = 0) [    3.333174] mmc2: error -110
whilst initialising MMC card

I don't have so much time to investigate this issue, but it's clear that
this patch doesn't fix the issue (and actually worsens it) for my device.

Well, that makes things more complicated.

quoted

As discussed on IRC we now have varying reports of the emmc working or not 
working with and without that patch applied. So it's not really a bandaid fix 
and I've thus dropped this patch again.

Thanks for dropping it! For the record, my eMMC shows up as:
mmcblk2: mmc2:0001 HAG2e 14.7 GiB

Mine looks similar, although reporting as mmc0:

  [    3.166550] mmcblk0: mmc0:0001 HAG2e 14.7 GiB

Maybe it could help to share what each tested device reports as eMMC model and
associate that with the current behavior, in spite of getting a clearer idea of
what issue affects what model.

FWIW, I'm using a veyron-speedy with 4GB of ram, not sure what other
information might be useful to distinguish between different models.

On the bottom of the case, it claims to be a C201P. Near the serial,
it's marked as C201PA-DS02-LG.


live well,
  vagrant