Thread (18 messages) 18 messages, 3 authors, 2016-10-19
STALE3526d
Revisions (6)
  1. v16 [diff vs current]
  2. v17 [diff vs current]
  3. v18 [diff vs current]
  4. v19 [diff vs current]
  5. v20 current
  6. v21 [diff vs current]

[PATCH v20 03/10] add bindings document for altera freeze bridge

From: Alan Tull <hidden>
Date: 2016-10-17 16:10:18
Also in: linux-arm-kernel, lkml
Subsystem: fpga manager framework, open firmware and flattened device tree bindings, the rest · Maintainers: Moritz Fischer, Xu Yilun, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Add bindings document for the Altera Freeze Bridge.  A Freeze
Bridge is used to gate traffic to/from a region of a FPGA
such that that region can be reprogrammed.  The Freeze Bridge
exist in FPGA fabric that is not currently being reconfigured.

Signed-off-by: Alan Tull <redacted>
Signed-off-by: Matthew Gerlach <redacted>
---
v19: Added in v19 of patchset, uses fpga image info struct
v20: fix one underscore to hyphen
---
 .../bindings/fpga/altera-freeze-bridge.txt         | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
new file mode 100644
index 0000000..f8e288c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
@@ -0,0 +1,23 @@
+Altera Freeze Bridge Controller Driver
+
+The Altera Freeze Bridge Controller manages one or more freeze bridges.
+The controller can freeze/disable the bridges which prevents signal
+changes from passing through the bridge.  The controller can also
+unfreeze/enable the bridges which allows traffic to pass through the
+bridge normally.
+
+Required properties:
+- compatible		: Should contain "altr,freeze-bridge-controller"
+- regs			: base address and size for freeze bridge module
+
+Optional properties:
+- bridge-enable		: 0 if driver should disable bridge at startup
+			  1 if driver should enable bridge at startup
+			  Default is to leave bridge in current state.
+
+Example:
+	freeze-controller@100000450 {
+		compatible = "altr,freeze-bridge-controller";
+		regs = <0x1000 0x10>;
+		bridge-enable = <0>;
+	};
-- 
2.10.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help