On 2016-10-07 17:21, Pantelis Antoniou wrote:
quoted hunk ↗ jump to hunk
From: Georgi Vlaev <redacted>
Add binding document for the i2c mux driver of Juniper's I2CS FPGA.
Signed-off-by: Georgi Vlaev <redacted>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <redacted>
---
.../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
new file mode 100644
index 0000000..03d917f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
@@ -0,0 +1,27 @@
+* Juniper I2C Mux on I2CS
+
+ I2C mux driver for switching the RE access to the FPC i2c bus.
+ Compatible with the FPC variant of the I2CS.
+
+Required properties:
+
+ - compatible: "jnx,i2cs-mux-i2cs".
jnx,i2c-mux-i2cs
quoted hunk ↗ jump to hunk
+
+The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.txt in this directory.
To accommodate changes pending for 4.9, change "mux" to "gate" in
this line...
+ - I2C child bus nodes. See i2c-mux.txt in this directory.
This line is wrong since the child nodes themselves are optional in
i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since
the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt).
quoted hunk ↗ jump to hunk
+
+Example:
+
+fpc0_mux {
+ compatible = "jnx,i2c-mux-i2cs";
+ #address-cells = <1>;
+ #size-cells = <0>;
...drop these two...
+
+ fpc0i2c0: i2c@0 {
...change i2c@0 to i2c-gate...
quoted hunk ↗ jump to hunk
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
...and drop reg.
Cheers,
Peter
+ };
+};