[PATCH 3/3] dt-bindings: oxnas: Update Pinctrl and GPIO for OX820 Support
From: Neil Armstrong <hidden>
Date: 2016-10-04 13:42:16
Also in:
linux-arm-kernel, linux-gpio, lkml
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Neil Armstrong <redacted> --- Documentation/devicetree/bindings/gpio/gpio_oxnas.txt | 2 +- Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
index 928ed4f..9665147 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt@@ -3,7 +3,7 @@ Please refer to gpio.txt for generic information regarding GPIO bindings. Required properties: - - compatible: "oxsemi,ox810se-gpio" + - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio" - reg: Base address and length for the device. - interrupts: The port interrupt shared by all pins. - gpio-controller: Marks the port as GPIO controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
index d607432..09e81a9 100644
--- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt@@ -9,7 +9,7 @@ used for a specific device or function. This node represents configurations of pins, optional function, and optional mux related configuration. Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" + - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - oxsemi,sys-ctrl: a phandle to the system controller syscon node Required properties for pin configuration sub-nodes:
--
2.7.0