[PATCH 2/2] fsl-quadspi: introduce per-bus spi-bus-width property

@@ -24,6 +24,17 @@ Optional properties:
 			      (Please check the board's schematic.)
   - big-endian : That means the IP register is big endian
 
+Required subnode properties:
+  - spi-max-frequency: maximum operating frequency of the SPI device.
+                       The controller will run at the lowest of all
+                       specified frequencies (or at the default of 66 MHz).
+
+Optional subnode properties:
+  - spi-bus-width: if present, specifies how the decide should be read.
+                   1 specifies FAST read, 2 specifies DUAL read, and 4
+                   specifies QUAD read.
+                   If absent, normal (non-FAST) reads are used.
+
 Example:
 
 qspi0: quadspi@40044000 {

@@ -37,5 +48,12 @@ qspi0: quadspi@40044000 {
 
 	flash0: s25fl128s@0 {
 		....
+		spi-max-frequency = <66000000>;
+		spi-bus-width = <2>;
+	};
+	flash1: s25fl128s@1 {
+		....
+		spi-max-frequency = <88000000>;
+		spi-bus-width = <4>;
 	};
 };