Thread (2 messages) 2 messages, 2 authors, 2016-09-14

Re: [PATCH v3 3/4] arm: dts: qcom: apq8064: Add display DT nodes

From: Archit Taneja <hidden>
Date: 2016-09-14 17:57:44
Also in: dri-devel, linux-arm-msm


On 9/14/2016 3:14 AM, Stephen Boyd wrote:
On 09/13/2016 08:21 AM, Archit Taneja wrote:
quoted
APQ8064 contains a MDP4 based display controller. It contains a HDMI, LVDS
and 2 DSI outputs.

Add display DT nodes for MDP4, HDMI TX and HDMI PHY. MDP4 based display
blocks have a flat device hierarchy.

Nodes for other outputs will be added later.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org

Tested-by: John Stultz <redacted>
Signed-off-by: Archit Taneja <redacted>
---
  arch/arm/boot/dts/qcom-apq8064.dtsi | 91 +++++++++++++++++++++++++++++++++++++
  1 file changed, 91 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 74a9b6c..b688fb6 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -955,6 +955,97 @@
  			reset-names = "axi", "ahb", "por", "pci", "phy";
  			status = "disabled";
  		};
+
+		hdmi: hdmi-tx@4a00000 {
+			compatible = "qcom,hdmi-tx-8960";
+			reg = <0x04a00000 0x2f0>;
+			reg-names = "core_physical";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_NONE>;
Please specify the IRQ_TYPE that isn't NONE here.
quoted
+			clocks = <&mmcc HDMI_APP_CLK>,
+				 <&mmcc HDMI_M_AHB_CLK>,
+				 <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "core_clk",
+				      "master_iface_clk",
+				      "slave_iface_clk";
+
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hdmi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@4a00400 {
+			compatible = "qcom,hdmi-phy-8960";
+			reg = <0x4a00400 0x60>,
+			      <0x4a00500 0x100>;
+			reg-names = "hdmi_phy",
+				    "hdmi_pll";
+
+			clocks = <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "slave_iface_clk";
+		};
+
+		mdp: mdp@5100000 {
+			compatible = "qcom,mdp4";
+			reg = <0x05100000 0xf0000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_NONE>;
Same comment here.
Will fix this.

Thanks,
Archit


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help