D Dmitry Torokhov #
Message details and related content
On Wed, Sep 07, 2016 at 01:42:41PM +0200, Marcin Niestroj wrote:
On 03.09.2016 19:53, Dmitry Torokhov wrote:quoted
On Fri, Sep 02, 2016 at 12:35:26PM +0200, Marcin Niestroj wrote:quoted
This driver enables us to use tps65217's power button as KEY_POWER on am335x boards (directly connected button in chiliboard, accessible pin via expansion header in beaglebone). This patch has been tested with chiliboard. Signed-off-by: Marcin Niestroj <redacted> Acked-by: Rob Herring <redacted>Was it produces by soing s/65218/65217 over drivers/input/misc/tps65217-pwrbutton.c? I honestly can't see much difference between the 2. Can they be probably be combined?I didn't think of that earlier. Below is a patch that adds support for tps65217 power button in tps65218-pwrbutton.c. Is this approach ok for you? If yes, I will send new patch version with it. Additionally I guess the file should be renamed to tps6521x-pwrbutton.c and config option changed to CONFIG_INPUT_TPS6521X_PWRBUTTON?
We could but I do not think it is that important.
quoted hunk
diff --git a/drivers/input/misc/tps65218-pwrbutton.cb/drivers/input/misc/tps65218-pwrbutton.c index a39b626..19d2bb1 100644--- a/drivers/input/misc/tps65218-pwrbutton.c +++ b/drivers/input/misc/tps65218-pwrbutton.c@@ -1,8 +1,9 @@ /* - * Texas Instruments' TPS65218 Power Button Input Driver + * Texas Instruments' TPS65217 and TPS65218 Power Button Input Driver * * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ * Author: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> + * Author: Marcin Niestroj <m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as@@ -18,31 +19,73 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/mfd/tps65217.h> #include <linux/mfd/tps65218.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> -struct tps65218_pwrbutton { +struct tps6521x_data { + unsigned int reg_status; + unsigned int pb_mask; + const char *name; +}; + +static const struct tps6521x_data tps65217_data = { + .reg_status = TPS65217_REG_STATUS, + .pb_mask = TPS65217_STATUS_PB, + .name = "tps65217_pwrbutton", +}; + +static const struct tps6521x_data tps65218_data = { + .reg_status = TPS65218_REG_STATUS, + .pb_mask = TPS65218_STATUS_PB_STATE, + .name = "tps65218_pwrbutton", +}; + +struct tps6521x_pwrbutton { struct device *dev; - struct tps65218 *tps; + void *tps; struct input_dev *idev; + const struct tps6521x_data *data; + char phys[32]; }; -static irqreturn_t tps65218_pwr_irq(int irq, void *_pwr) +static const struct of_device_id of_tps6521x_pwr_match[] = { + { .compatible = "ti,tps65217-pwrbutton", .data = &tps65217_data }, + { .compatible = "ti,tps65218-pwrbutton", .data = &tps65218_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_tps6521x_pwr_match); + +static int tps6521x_reg_read(struct tps6521x_pwrbutton *pwr,unsigned int reg, + unsigned int *val) { - struct tps65218_pwrbutton *pwr = _pwr; + if (pwr->data == &tps65217_data) + return tps65217_reg_read((struct tps65217 *) pwr->tps, + reg, val); + else if (pwr->data == &tps65218_data) + return tps65218_reg_read((struct tps65218 *) pwr->tps, + reg, val);
This is step in right direction, but not quite there yet. You could add the reg_read pointer to your tps6521x_data and avoid doing if/else/case, or, maybe better yet, have registers accessible via regmap. Thanks. -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html