[PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys
From: Vladimir Barinov <hidden>
Date: 2016-09-02 16:24:58
Also in:
linux-renesas-soc
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2016-09-05 · Re: [PATCH v5 2/4] arm64: dts: h3ulcb: enable GPIO keys · Simon Horman <hidden>
This supports GPIO keys on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> --- Changes in version 4: - initially added Changes in version 5: - nothing arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 14 +++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts@@ -12,6 +12,7 @@ /dts-v1/; #include "r8a7795.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Renesas H3ULCB board based on r8a7795";
@@ -31,6 +31,18 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; leds { compatible = "gpio-leds";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html