Re: [PATCH] iio: sx9500: add final devicetree support

On Fri, 2016-09-02 at 11:53 -0300, Fabio Estevam wrote:

On Fri, Sep 2, 2016 at 11:49 AM, Christoph Fritz
[off-list ref] wrote:

quoted

+sx9500@28 {
+       compatible = "semtech,sx9500";
+       reg = <0x28>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sx9500>;
+       interrupt-parent = <&gpio2>;
+       interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+       reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;

Datasheet says the reset is active low.

Here on my board I'm using the reset pin as an open-drain with external
pullup, so GPIO_ACTIVE_HIGH is valid.

As this is an example, I don't care if it says _HIGH or _LOW.