On Mon, 2016-09-05 at 09:44 +0800, HS Liao wrote:

Hi,

This is Mediatek MT8173 Command Queue(CMDQ) driver. The CMDQ is used
to help write registers with critical time limitation, such as
updating display configuration during the vblank. It controls Global
Command Engine (GCE) hardware to achieve this requirement.

These patches have a build dependency on top of v4.8-rc1.

Changes since v13:
 - move to mailbox folder
 - simplify cmdq_thread_is_in_wfe

Best regards,
HS Liao

HS Liao (4):
  dt-bindings: soc: Add documentation for the MediaTek GCE unit
  CMDQ: Mediatek CMDQ driver
  arm64: dts: mt8173: Add GCE node
  CMDQ: save more energy in idle

 .../devicetree/bindings/mailbox/mtk-gce.txt        |  43 +
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  10 +
 drivers/mailbox/Kconfig                            |  10 +
 drivers/mailbox/Makefile                           |   2 +
 drivers/mailbox/mtk-cmdq.c                         | 965 +++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq.h                   | 180 ++++
 6 files changed, 1210 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt
 create mode 100644 drivers/mailbox/mtk-cmdq.c
 create mode 100644 include/linux/mailbox/mtk-cmdq.h

Hi Jassi,

Sorry to disturb you.
Do you have any further comment on CMDQ v14?

Thanks.
HS


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html