Re: [RESEND PATCH 2/3] ARM: dts: add TOPEET itop elite based board
From: Bartlomiej Zolnierkiewicz <hidden>
Date: 2016-09-01 13:07:13
Also in:
linux-arm-kernel, linux-samsung-soc, lkml
Hi, On Wednesday, August 31, 2016 08:59:21 PM Randy Li wrote:
The TOPEET itop exynos 4412 have three versions base board. The Elite version is the cheap one without too much peripheral devices on it. Currently supported are serial console, wired networking(USB), USB OTG in peripheral mode, USB host, SD storage, GPIO buttons, PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also enabled. The FIMC is not used for camera currently, I enabled it just for a colorspace convertor. Signed-off-by: Randy Li <redacted>
[...]
quoted hunk ↗ jump to hunk
--- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ + exynos4412-itop-elite.dtb \
Minor nit: Please keep dtb files in alphabetical order.
exynos4412-trats2.dtb dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \
Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics