[PATCH 01/10] dt-bindings: Add compatible property for LS1012A
From: Bhaskar Upadhaya <hidden>
Date: 2016-08-26 10:27:40
Also in:
linux-arm-kernel
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Bhaskar Upadhaya <redacted> --- Documentation/devicetree/bindings/arm/fsl.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index dbbc095..51b6b03 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt@@ -119,7 +119,7 @@ Freescale DCFG configuration and status for the device. Such as setting the secondary core start address and release the secondary core from holdoff and startup. Required properties: - - compatible: should be "fsl,ls1021a-dcfg" + - compatible: can be "fsl,ls1021a-dcfg", "fsl,ls1012a-dcfg", "fsl,ls1043a-dcfg" - reg : should contain base address and length of DCFG memory-mapped registers Example:
@@ -151,3 +151,14 @@ LS2080A ARMv8 based RDB Board Required root node properties: - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; +LS1012A ARMv8 based FRDM Board +Required root node properties: + - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; + +LS1012A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + +LS1012A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
--
1.9.1