Re: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

Just like with a13/a23/a33 most a31 tablets are derived from the same
reference design. Add a .dtsi file with all the common bits to avoid
endless copy and pasting of these.

The sun6i-reference-design-tablet.dtsi this commit adds is a copy
of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
removed / left in sun6i-a31s-colorfly-e708-q1.dts.

Signed-off-by: Hans de Goede <redacted>
---
 arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts  | 147 +--------------------
 ...8-q1.dts => sun6i-reference-design-tablet.dtsi} |  26 +---
 2 files changed, 2 insertions(+), 171 deletions(-)
 copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)

diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index 34d8710..882a4d8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts

@@ -42,32 +42,11 @@

 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun6i-reference-design-tablet.dtsi"

 / {
        model = "Colorfly E708 Q1 tablet";
        compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&cpu0 {
-       cpu-supply = <&reg_dcdc3>;
-};
-
-&ehci0 {
-       /* rtl8188etv wifi is connected here */
-       status = "okay";
 };

 &lradc {

@@ -82,136 +61,12 @@
        };
 };

-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
-       vmmc-supply = <&reg_dcdc1>;
-       bus-width = <4>;
-       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-       cd-inverted;
-       status = "okay";
-};
-
-&pio {
-       mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-               allwinner,pins = "PA8";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PA15";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-};
-
-&p2wi {
-       status = "okay";
-
-       axp22x: pmic@68 {
-               compatible = "x-powers,axp221";
-               reg = <0x68>;
-               interrupt-parent = <&nmi_intc>;
-               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-               drivevbus-supply = <&reg_vcc5v0>;
-               x-powers,drive-vbus-en;
-       };
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo3 {
-       regulator-always-on;
-       regulator-min-microvolt = <2700000>;
-       regulator-max-microvolt = <3300000>;
-       regulator-name = "avcc";
-};
-
-&reg_dc1sw {
-       regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-       regulator-always-on;
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-cpus"; /* This is an educated guess */
-};
-
-&reg_dcdc1 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-       regulator-always-on;
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-       regulator-always-on;
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-       regulator-always-on;
-       regulator-min-microvolt = <1500000>;
-       regulator-max-microvolt = <1500000>;
-       regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-       regulator-min-microvolt = <3300000>;
-       regulator-max-microvolt = <3300000>;
-       regulator-name = "vcc-wifi";
-};
-
 &reg_dldo2 {
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <1800000>;
        regulator-name = "vcc-pg";
 };

-&reg_drivevbus {
-       regulator-name = "usb0-vbus";
-       status = "okay";
-};
-
 &simplefb_lcd {
-       vcc-lcd-supply = <&reg_dc1sw>;
        vcc-pg-supply = <&reg_dldo2>;
 };
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usb_power_supply {
-       status = "okay";
-};
-
-&usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
-       usb0_vbus_power-supply = <&usb_power_supply>;
-       usb0_vbus-supply = <&reg_drivevbus>;
-       usb1_vbus-supply = <&reg_dldo1>;
-       status = "okay";
-};

diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
similarity index 90%
copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 34d8710..0c43430 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi

@@ -40,8 +40,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

-/dts-v1/;
-#include "sun6i-a31s.dtsi"
 #include "sunxi-common-regulators.dtsi"

 #include <dt-bindings/gpio/gpio.h>

@@ -49,9 +47,6 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>

 / {
-       model = "Colorfly E708 Q1 tablet";
-       compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
        aliases {
                serial0 = &uart0;
        };

@@ -66,20 +61,8 @@
 };

 &ehci0 {
-       /* rtl8188etv wifi is connected here */
-       status = "okay";
-};
-
-&lradc {

-       vref-supply = <&reg_aldo3>;
+       /* Wifi is connected here */
        status = "okay";
-
-       button@1000 {
-               label = "Home";
-               linux,code = <KEY_HOMEPAGE>;
-               channel = <0>;
-               voltage = <1000000>;
-       };
 };

 &mmc0 {

@@ -181,12 +164,6 @@
        regulator-name = "vcc-wifi";
 };

-&reg_dldo2 {
-       regulator-min-microvolt = <1800000>;
-       regulator-max-microvolt = <1800000>;
-       regulator-name = "vcc-pg";
-};
-
 &reg_drivevbus {
        regulator-name = "usb0-vbus";
        status = "okay";

@@ -194,7 +171,6 @@

 &simplefb_lcd {
        vcc-lcd-supply = <&reg_dc1sw>;
-       vcc-pg-supply = <&reg_dldo2>;
 };

 &usb_otg {
--

2.7.4