Re: [PATCH 2/4] MIPS: BMIPS: Add support GPIO device nodes

Hi,

On 9 August 2016 at 03:44, Jaedon Shin [off-list ref] wrote:

Hi Jonas,

On Aug 8, 2016, at 11:06 PM, Jonas Gorski [off-list ref] wrote:

quoted

Hi,

please always include devicetree for any dts(i) related changes.

On 8 August 2016 at 04:17, Jaedon Shin [off-list ref] wrote:

quoted

(snip)

diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 9db84f2a6664..dd8b8fb97053 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts

@@ -59,6 +59,14 @@
       status = "okay";

};

+&upg_gio {
+       status = "okay";
+};
+
+&upg_gio_aon {
+       status = "okay";
+};
+

You don't set their status in the dtsi, they will be enabled by
default, and you can drop this change.

quoted

&enet0 {
       status = "okay";
};

Regards
Jonas

The status="disabled" has been missing. It will be added in v2.
The interrupt-controller@ will also be changed.

I thought that was indented, since GPIO controllers usually are always
present (you don't disable the irq controllers by default either).

Not that I want to tell you how you do your dts(i) files, but I would
expect things that you usually always need (irq, clocks, gpios) are
present by default.


Regards
Jonas
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html