[PATCH] dt-bindings: GPIO: Add TPIC2810 binding
From: Roger Quadros <hidden>
Date: 2016-08-23 11:49:34
Also in:
linux-gpio, lkml
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: "Andrew F. Davis" <redacted> Add binding for TPIC2810 GPO device. Signed-off-by: Andrew F. Davis <redacted> Signed-off-by: Roger Quadros <redacted> --- Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
new file mode 100644
index 0000000..1afc2de
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt@@ -0,0 +1,16 @@ +TPIC2810 GPIO controller bindings + +Required properties: + - compatible : Should be "ti,tpic2810". + - reg : The I2C address of the device + - gpio-controller : Marks the device node as a GPIO controller. + - #gpio-cells : Should be two. For consumer use see gpio.txt. + +Example: + + gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + };
--
2.7.4