Thread (11 messages) 11 messages, 2 authors, 2016-08-23

Re: [PATCH v7 7/7] doc: bindings: act8945a-charger: Update properties

From: Sebastian Reichel <sre@kernel.org>
Date: 2016-08-23 03:03:37
Also in: linux-arm-kernel, linux-pm, lkml

Hi,

On Mon, Aug 22, 2016 at 02:49:17PM +0800, Wenyou Yang wrote:
Due the driver improvements, update the properties,
 - Remove "active-semi,check-battery-temperature" property.
 - Add the properties, "active-semi,irq_gpio"
   and "active-semi,lbo-gpios".

Signed-off-by: Wenyou Yang <redacted>
Acked-by: Rob Herring <robh@kernel.org>
I wonder if it's too late to slightly break the DT API by
introducing a proper sub-device for the charger and having all those
charger specific details described there. Not being able to use the
devm_ functions because all properties are assigned to the parent
device is not very nice.

We could easily support reading timeouts and threshold information
from the both (parent and sub-device) and just mark the parent
binding deprecated. The only real API break would be
"active-semi,chglev-gpios", which is currently broken anyways in the
driver as far as I can see (I should have reviewed this more
carefully previously).

In other words I suggest the following:

pmic@5b {
    compatible = "active-semi,act8945a";
    reg = <0x5b>;
    status = "okay";

    /* the following 3 are deprecated, but still supported */
    //active-semi,input-voltage-threshold-microvolt = <6600>;
    //active-semi,precondition-timeout = <40>;
    //active-semi,total-timeout = <3>;

    /* no longer supported, never worked properly */
    //active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;

    /* this is new, mfd should register charger sub-dev independently
     * of the subnode for backwards compatibility. Then optional
     * gpios/irqs are not available. But those either never worked
     * or did not exist before this update. */
    charger {
        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
		interrupt-parent = <&pioA>;
        interrupts = <45 GPIO_ACTIVE_LOW>

        active-semi,input-voltage-threshold-microvolt = <6600>;
        active-semi,precondition-timeout = <40>;
        active-semi,total-timeout = <3>;
    };
};

-- Sebastian

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help