[PATCH v2 0/7] aspeed: Integrate pinctrl and gpio drivers
flat view
DORMANTno replies
SUPERSEDED
From: Andrew Jeffery <hidden>
Date: 2016-08-19 12:49:10
Also in:
linux-arm-kernel, lkml
Subsystem:
arm port, arm/aspeed machine support, the rest · Maintainers:
Russell King, Joel Stanley, Andrew Jeffery, Linus Torvalds
Status: Superseded by v4 (posted 2016-12-06). [go to v4]
Revision v2 (3 revisions archived).
Revisions (3)
- v2 current
- v3 [diff against previous]
- v4 [diff against previous]
Hi all, This series contains the SoC-related patches of the Aspeed pinctrl and gpio drivers. The v2 has been split out from the original monolithic series found at: https://lkml.org/lkml/2016/7/20/69 The combined series has been tested with both the AST2400 (g4) and AST2500 (g5) SoCs on OpenPOWER Palmetto and Aspeed AST2500 EVB machines respectively, and similarly in QEMU with the palmetto-bmc and ast2500-evb machines[1]. Cheers, Andrew Andrew Jeffery (7): mach-aspeed: Select pinctrl drivers mach-aspeed: Select GPIO driver aspeed-g4: Add syscon and pin controller nodes palmetto: Request relevant mux functions in devicetree aspeed-g4: Add gpio controller to devicetree aspeed-g5: Add syscon and pin controller nodes aspeed-g5: Add gpio controller to devicetree arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 14 + arch/arm/boot/dts/aspeed-g4.dtsi | 429 ++++++++++++++++++++++++++ arch/arm/boot/dts/aspeed-g5.dtsi | 213 +++++++++++++ arch/arm/mach-aspeed/Kconfig | 5 + 4 files changed, 661 insertions(+) -- 2.9.3