Re: [PATCH 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
From: Krzysztof Kozlowski <hidden>
Date: 2016-08-17 06:53:46
Also in:
linux-arm-kernel, linux-samsung-soc, lkml
On 08/16/2016 08:35 AM, Chanwoo Choi wrote:
This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. This board fully support the all things for mobile target. This patch supports the following devices: 1. basic SoC - Initial booting for Samsung Exynos5433 SoC - DRAM LPDDR3 (3GB) - eMMC (32GB) - ARM architecture timer 2. power management devices - Sasmung S2MPS13 PMIC for the power supply - CPUFREQ for big.LITTLE cores - TMU for big.LITTLE cores and GPU - ADC with thermistor to measure the temperature of AP/Battery/Charger - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator) 3. sound devices - I2S for sound bus - LPASS for sound power control - Wolfson WM5110 for sound codec - Maxim MAX98504 for speaker amplifier - TM2 ASoC Machine device driver node 3. display devices - DECON, DSI and MIC for the panel output 4. usb devices - USB 3.0 DRD (Dual Role Device) - USB 3.0 Host controller 5. storage devices - MSHC (obile Storae Host Controller) for eMMC device
Mobile Storage
quoted hunk ↗ jump to hunk
6. misc devices - gpio-keys (power, volume up/down, home key) - PWM (Pulse Width Modulation Timer) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Joonyoung Shim <redacted> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Jonghwa Lee <redacted> Signed-off-by: Beomho Seo <redacted> Signed-off-by: Jaewon Kim <redacted> Signed-off-by: Hyungwon Hwang <redacted> Signed-off-by: Inha Song <redacted> Signed-off-by: Ingi kim <redacted> Signed-off-by: Krzysztof Kozlowski <redacted> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <redacted> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- .../bindings/arm/samsung/samsung-boards.txt | 1 + arch/arm64/boot/dts/exynos/Makefile | 5 +- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++ 3 files changed, 1008 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dtsdiff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 0ea7f14ef294..c704b4bf6137 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt@@ -15,6 +15,7 @@ Required root node properties: - "samsung,xyref5260" - for Exynos5260-based Samsung board. - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. - "samsung,sd5v1" - for Exynos5440-based Samsung board. - "samsung,ssdk5440" - for Exynos5440-based Samsung board.diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 50c9b9383cfa..7ddea53769a7 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile@@ -1,4 +1,7 @@ -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb +dtb-$(CONFIG_ARCH_EXYNOS) += \ + exynos5433-tm2.dtb \ + exynos5433-tm2e.dtb \ + exynos7-espresso.dtb always := $(dtb-y) subdir-y := $(dts-dirs)diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts new file mode 100644 index 000000000000..3e497b0d0015 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts@@ -0,0 +1,1003 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; + + aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + i2c8 = &hsi2c_8; + i2c9 = &hsi2c_9; + i2c10 = &hsi2c_10; + i2c11 = &hsi2c_11; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + mshc2 = &mshc_2; + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + usbdrdphy0 = &usbdrd30_phy; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power_key { + gpios = <&gpa2 7 1>;
s/1/GPIO_ACTIVE_LOW/
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+
+ volume_up_key {
+ gpios = <&gpa2 0 1>;s/1/GPIO_ACTIVE_LOW/
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume-up key";
+ debounce-interval = <10>;
+ };
+
+ volume_down_key {
+ gpios = <&gpa2 1 1>;s/1/GPIO_ACTIVE_LOW/
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume-down key";
+ debounce-interval = <10>;
+ };
+
+ homepage_key {
+ gpios = <&gpa0 3 1>;s/1/GPIO_ACTIVE_LOW/
+ linux,code = <KEY_MENU>;
+ label = "homepage key";
+ debounce-interval = <10>;
+ };
+ };
+
+ i2c_max98504: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+ &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max98504: max98504@31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+ maxim,rx-path = <1>;
+ maxim,tx-path = <1>;
+ maxim,tx-channel-mask = <3>;
+ maxim,tx-channel-source = <2>;
+ };
+ };
+
+ sound {
+ compatible = "samsung,tm2-audio";
+ audio-codec = <&wm5110>;
+ i2s-controller = <&i2s0>;
+ audio-amplifier = <&max98504>;
+ mic-bias-gpios = <&gpr3 2 0>;s/0/GPIO_ACTIVE_HIGH/
+ model = "wm5110";
+ samsung,audio-routing =
+ /* Headphone */
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ /* Speaker */
+ "SPK", "SPKOUT",
+ "SPKOUT", "HPOUT2L",
+ "SPKOUT", "HPOUT2R",
+
+ /* Receiver */
+ "RCV", "HPOUT3L",
+ "RCV", "HPOUT3R";
+ status = "okay";
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ thermistor-ap {
+ compatible = "ntc,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor_battery: thermistor-battery {
+ compatible = "ntc,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor-charger {
+ compatible = "ntc,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 2>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+ status = "okay";
+ iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>;
+
+ i80-if-timings {
+ };
+};
+
+&dsi {
+ status = "okay";
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ };
+ };
+ };
+};
+
+&hsi2c_0 {
+ status = "okay";
+ clock-frequency = <2500000>;
+
+ s2mps13_pmic@66 {
+ compatible = "samsung,s2mps13-pmic";
+ interrupt-parent = <&gpa0>;
+ interrupts = <7 0>;s/0/IRQ_TYPE_NONE/
+ reg = <0x66>; + wakeup;
I think there is no such "wakeup" property.
+ samsung,s2mps11-wrstbi-ground;
+
+ s2mps13_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_0.9V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD1_E_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD10_DPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MIPI2L_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD18_MIPI2L_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD18_LLI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD33_USB30_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_INT_M_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_KFC_M_1.1V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_G3D_M_0.95V_AP";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDDQ_EFUSE";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_TFLASH_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "V_CODEC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDDA_1.8V_COMP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_IO_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "CAM_SEN_CORE_1.2V_AP";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VT_CAM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "CAM_SEN_A2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_AF_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VCC_3.0V_LCD_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VCC_1.8V_LCD_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VT_CAM_2.8V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "TSP_AVDD_3.3V_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VTOUCH_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VTOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VCC_1.8V_MHL_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "OIS_VM_2.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo36_reg: LDO36 {
+ regulator-name = "VSIL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo37_reg: LDO37 {
+ regulator-name = "VF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo39_reg: LDO39 {
+ regulator-name = "V_HRM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo40_reg: LDO40 {
+ regulator-name = "V_HRM_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_EGL_1.0V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_KFC_1.0V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_INT_0.95V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_G3D_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_MEM1_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VDD_LLDO_1.35V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_MLDO_2.0V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_mem2";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&hsi2c_8 {
+ status = "okay";
+
+ max77843@66 {
+ compatible = "samsung,max77843";There is no such compatible.
+ interrupt-parent = <&gpa1>; + interrupts = <5 2>;
IRQ_TYPE_EDGE_FALLING
+ reg = <0x66>; + wakeup;
Ditto - wakeup.
+
+ muic: max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";BTW, It's a pity that max77843 submission was not finished. These compatibles are not documented. Also the charger driver did not reach mainline. The fuelgauge probably has wrong compatible in MFD driver.
+ safeout1_reg: SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ safeout2_reg: SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ haptic: max77843-haptic {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ pwm-names = "haptic";
+ };
+ };
+};
+
+&hsi2c_11 {
+ status = "okay";What is inside? How does it work if there is no child device specified?
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&lpass {
+ status = "okay";
+};
+
+&mshc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ non-removable;Putting both properties - broken and non-removable - is not supported. Please choose one.
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 3>;
+ samsung,read-strobe-delay = <90>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rdqs>;
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+};
+
+&pinctrl_alive {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ initial_alive: initial-state {
+ PIN(IN, gpa0-0, DOWN, LV1);
+ PIN(IN, gpa0-1, NONE, LV1);
+ PIN(IN, gpa0-2, DOWN, LV1);
+ PIN(IN, gpa0-3, NONE, LV1);
+ PIN(IN, gpa0-4, NONE, LV1);
+ PIN(IN, gpa0-5, DOWN, LV1);
+ PIN(IN, gpa0-6, NONE, LV1);
+ PIN(IN, gpa0-7, NONE, LV1);
+
+ PIN(IN, gpa1-0, UP, LV1);
+ PIN(IN, gpa1-1, NONE, LV1);
+ PIN(IN, gpa1-2, NONE, LV1);
+ PIN(IN, gpa1-3, DOWN, LV1);
+ PIN(IN, gpa1-4, DOWN, LV1);
+ PIN(IN, gpa1-5, NONE, LV1);
+ PIN(IN, gpa1-6, NONE, LV1);
+ PIN(IN, gpa1-7, NONE, LV1);
+
+ PIN(IN, gpa2-0, NONE, LV1);
+ PIN(IN, gpa2-1, NONE, LV1);
+ PIN(IN, gpa2-2, NONE, LV1);
+ PIN(IN, gpa2-3, DOWN, LV1);
+ PIN(IN, gpa2-4, NONE, LV1);
+ PIN(IN, gpa2-5, DOWN, LV1);
+ PIN(IN, gpa2-6, DOWN, LV1);
+ PIN(IN, gpa2-7, NONE, LV1);
+
+ PIN(IN, gpa3-0, DOWN, LV1);
+ PIN(IN, gpa3-1, DOWN, LV1);
+ PIN(IN, gpa3-2, NONE, LV1);
+ PIN(IN, gpa3-3, DOWN, LV1);
+ PIN(IN, gpa3-4, NONE, LV1);
+ PIN(IN, gpa3-5, DOWN, LV1);
+ PIN(IN, gpa3-6, DOWN, LV1);
+ PIN(IN, gpa3-7, DOWN, LV1);
+
+ PIN(IN, gpf1-0, NONE, LV1);
+ PIN(IN, gpf1-1, NONE, LV1);
+ PIN(IN, gpf1-2, DOWN, LV1);
+ PIN(IN, gpf1-4, UP, LV1);
+ PIN(OUT, gpf1-5, NONE, LV1);
+ PIN(IN, gpf1-6, DOWN, LV1);
+ PIN(IN, gpf1-7, DOWN, LV1);
+
+ PIN(IN, gpf2-0, DOWN, LV1);
+ PIN(IN, gpf2-1, DOWN, LV1);
+ PIN(IN, gpf2-2, DOWN, LV1);
+ PIN(IN, gpf2-3, DOWN, LV1);
+
+ PIN(IN, gpf3-0, DOWN, LV1);
+ PIN(IN, gpf3-1, DOWN, LV1);
+ PIN(IN, gpf3-2, NONE, LV1);
+ PIN(IN, gpf3-3, DOWN, LV1);
+
+ PIN(IN, gpf4-0, DOWN, LV1);
+ PIN(IN, gpf4-1, DOWN, LV1);
+ PIN(IN, gpf4-2, DOWN, LV1);
+ PIN(IN, gpf4-3, DOWN, LV1);
+ PIN(IN, gpf4-4, DOWN, LV1);
+ PIN(IN, gpf4-5, DOWN, LV1);
+ PIN(IN, gpf4-6, DOWN, LV1);
+ PIN(IN, gpf4-7, DOWN, LV1);
+
+ PIN(IN, gpf5-0, DOWN, LV1);
+ PIN(IN, gpf5-1, DOWN, LV1);
+ PIN(IN, gpf5-2, DOWN, LV1);
+ PIN(IN, gpf5-3, DOWN, LV1);
+ PIN(OUT, gpf5-4, NONE, LV1);
+ PIN(IN, gpf5-5, DOWN, LV1);
+ PIN(IN, gpf5-6, DOWN, LV1);
+ PIN(IN, gpf5-7, DOWN, LV1);
+ };
+
+ te_irq: te_irq {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+};
+
+&pinctrl_cpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_cpif>;
+
+ initial_cpif: initial-state {
+ PIN(IN, gpv6-0, DOWN, LV1);
+ PIN(IN, gpv6-1, DOWN, LV1);
+ };
+};
+
+&pinctrl_ese {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_ese>;
+
+ initial_ese: initial-state {
+ PIN(IN, gpj2-0, DOWN, LV1);
+ PIN(IN, gpj2-1, DOWN, LV1);
+ PIN(IN, gpj2-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_fsys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_fsys>;
+
+ initial_fsys: initial-state {
+ PIN(IN, gpr3-0, NONE, LV1);
+ PIN(IN, gpr3-1, DOWN, LV1);
+ PIN(IN, gpr3-2, DOWN, LV1);
+ PIN(IN, gpr3-3, DOWN, LV1);
+ PIN(IN, gpr3-7, NONE, LV1);
+ };
+};
+
+&pinctrl_imem {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_imem>;
+
+ initial_imem: initial-state {
+ PIN(IN, gpf0-0, UP, LV1);
+ PIN(IN, gpf0-1, UP, LV1);
+ PIN(IN, gpf0-2, DOWN, LV1);
+ PIN(IN, gpf0-3, UP, LV1);
+ PIN(IN, gpf0-4, DOWN, LV1);
+ PIN(IN, gpf0-5, NONE, LV1);
+ PIN(IN, gpf0-6, DOWN, LV1);
+ PIN(IN, gpf0-7, UP, LV1);
+ };
+};
+
+&pinctrl_nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_nfc>;
+
+ initial_nfc: initial-state {
+ PIN(IN, gpj0-2, DOWN, LV1);
+ };
+};
+
+&pinctrl_peric {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_peric>;
+
+ initial_peric: initial-state {
+ PIN(IN, gpv7-0, DOWN, LV1);
+ PIN(IN, gpv7-1, DOWN, LV1);
+ PIN(IN, gpv7-2, NONE, LV1);
+ PIN(IN, gpv7-3, DOWN, LV1);
+ PIN(IN, gpv7-4, DOWN, LV1);
+ PIN(IN, gpv7-5, DOWN, LV1);
+
+ PIN(IN, gpb0-4, DOWN, LV1);
+
+ PIN(IN, gpc0-2, DOWN, LV1);
+ PIN(IN, gpc0-5, DOWN, LV1);
+ PIN(IN, gpc0-7, DOWN, LV1);
+
+ PIN(IN, gpc1-1, DOWN, LV1);
+
+ PIN(IN, gpc3-4, NONE, LV1);
+ PIN(IN, gpc3-5, NONE, LV1);
+ PIN(IN, gpc3-6, NONE, LV1);
+ PIN(IN, gpc3-7, NONE, LV1);
+
+ PIN(OUT, gpg0-0, NONE, LV1);
+ PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+ PIN(IN, gpd2-5, DOWN, LV1);
+
+ PIN(IN, gpd4-0, NONE, LV1);
+ PIN(IN, gpd4-1, DOWN, LV1);
+ PIN(IN, gpd4-2, DOWN, LV1);
+ PIN(IN, gpd4-3, DOWN, LV1);
+ PIN(IN, gpd4-4, DOWN, LV1);
+
+ PIN(IN, gpd6-3, DOWN, LV1);
+
+ PIN(IN, gpd8-1, UP, LV1);
+
+ PIN(IN, gpg1-0, DOWN, LV1);
+ PIN(IN, gpg1-1, DOWN, LV1);
+ PIN(IN, gpg1-2, DOWN, LV1);
+ PIN(IN, gpg1-3, DOWN, LV1);
+ PIN(IN, gpg1-4, DOWN, LV1);
+
+ PIN(IN, gpg2-0, DOWN, LV1);
+ PIN(IN, gpg2-1, DOWN, LV1);
+
+ PIN(IN, gpg3-0, DOWN, LV1);
+ PIN(IN, gpg3-1, DOWN, LV1);
+ PIN(IN, gpg3-5, DOWN, LV1);
+ PIN(IN, gpg3-7, DOWN, LV1);
+ };
+};
+
+&pinctrl_touch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_touch>;
+
+ initial_touch: initial-state {
+ PIN(IN, gpj1-2, DOWN, LV1);
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mic {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&spi_1 {
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm5110: wm5110-codec@0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 0 0>;Why three interrupt cells? Please use also IRQ_TYPE_NONE for flags.
+ clocks = <&xxti>, <&s2mps13_osc 2>;
s/2/S2MPS11_CLK_BT/ Best regards, Krzysztof