Hi Rich,

On Thu, Aug 04, 2016 at 02:31:18PM +0000, Jason Cooper wrote:

On Thu, Aug 04, 2016 at 04:30:36AM +0000, Rich Felker wrote:

quoted

Updated based on feedback from Thomas Gleixner. Removal of unnecessary
data allowed some simplification. Magic numbers have been replaced
with meaningful (I hope) macro constants, comments added, and minor
style issues fixed.

Also, driver was made conditional in Kconfig to avoid it showing up in
configurations where it's not relevant.

Rich


Rich Felker (2):
  of: add J-Core interrupt controller bindings
  irqchip: add J-Core AIC driver

 .../bindings/interrupt-controller/jcore,aic.txt    | 26 ++++++
 drivers/irqchip/Kconfig                            |  7 ++
 drivers/irqchip/Makefile                           |  1 +
 drivers/irqchip/irq-jcore-aic.c                    | 94 ++++++++++++++++++++++
 4 files changed, 128 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
 create mode 100644 drivers/irqchip/irq-jcore-aic.c

Once -rc1 drops, I'll put this in a branch, irqchip/jcore.  You can then
include it as a dep for other branches as needed.

This is now up and should appear in -next.

thx,

Jason.